产品中心
行业资讯 当前位置:首页>行业资讯>行业资讯

扭王块钢模具包括内部腔体

网址:www.zhihongmuju.cn  2022-04-09  作者:admin    阅读:

扭王块钢模具包括内部腔体构成扭王块结构的壳体和位于壳体上的辅助机构;壳体由底座壳、位于底座上的主体壳和位于主体壳上的顶座壳组成;壳体形成的腔体由下至上形成 杆件部、 杆件部和第三杆件部,底座壳与主体壳的下部所形成的腔体构成 杆件部,顶座壳和主体壳的上部形成的腔体构成第三杆件部,主体壳中部形成的腔体构成 杆件部;底座壳和主体壳均由对称的两部分组成;辅助机构包括支撑机构和拆卸机构。扭王块的大小进行模具生产的,扭王子块模具在保存之前,要进行彻底的清洗,这样下一次在拿出来使用的时候,才不会影响使用。
The torsion block steel die comprises an inner cavity, a shell forming the torsion block structure and an auxiliary mechanism located on the shell; The shell is composed of a base shell, a main shell on the base and a top seat shell on the main shell; The cavity formed by the shell forms a rod part, a rod part and a third rod part from bottom to top, the cavity formed by the base shell and the lower part of the main shell forms a rod part, the cavity formed by the top seat shell and the upper part of the main shell forms a third rod part, and the cavity formed in the middle of the main shell forms a rod part; The base shell and the main shell are composed of two symmetrical parts; The auxiliary mechanism includes a support mechanism and a disassembly mechanism. If the size of the twist King block is used for mold production, the twist Prince block mold should be thoroughly cleaned before preservation, so that it will not affect the use next time it is taken out for use.

返回新闻

联系电话(同微信)
13313028229